Daily Maintenance Of Water Tank

- Feb 22, 2020-

The water tank is convenient to transport, not easy to be damaged during transportation, easy to fold, and can be folded when not in use, which greatly saves space. Because of these advantages, many people prefer to use water tank transport. For example, the use of fire water pouches. Are there any things to pay attention to during transportation? How to maintain it in daily use?

Temporary Water Storage Tank

Care and precautions when using water tank

1.Disinfection:

Add one ounce of household bleach to one liter of water, stir for 10 seconds, then pour into a water bag. Wash and dry thoroughly overnight.


2.Clean:

Fire water tank manufacturers point out that many people think that washing water bags is a troublesome thing. In fact, the simple method is to wash the entire water bag with hot soapy water. If this doesn't work, use one-third of soda and three-quarters of mixed water. After shaking, add a quarter of lemon juice. Shake well. Repeat the above steps three times, drain as much water as possible, then soak for 20 minutes and rinse three times with hot water. One thing to note during this process is that adding lemon juice to dry soda can cause bubbles and negative pressure, so be careful.


3.Freezing

Put a half-full water bag in the refrigerator. Note that the water must be half full to avoid damage to the water bag after freezing.


4. Low temperature freezing

At low temperatures, the liquid in the water tank will freeze, which can easily cause the water tank to swell and destroy. Drink it often to keep fluids flowing. When not in use, try not to leave any residual liquid, and store as many water bags or water jackets as possible.


5. Suction valve is too loose

This will cause liquid leakage in the water bag, which needs to be resolved in time. Remove the suction valve from the water bag, then remove a part of the end of the water bag, and replace the end of the water bag with the back of the suction valve.


Cautions when filling the water tank

Before filling the water bag, the water bag should be carefully checked to ensure that it is not damaged before it can be used safely. In addition, the container should be checked for debris or sharp objects before filling. Any debris should be cleaned in time to prevent damage to the water bag during transportation. After the inspection is completed, the baffle should be installed in the container, and the equipment valve should be placed in the container facing up for use. Special attention must be paid to each steel pipe and baffle to be locked with a strap to connect with the feed pipe. The feed pipe must be hoisted to prevent damage to the equipment connection after filling.


When filling the water bag, the whole process of filling water must be guarded by someone. After filling, close the right door of the container and place the safety warning sign on the left door


Previous:How To Use A Tree Water Bag Next:What Is Picnic Mat?