Plant irrigation system
10M , 20M etc, length can be made according to clients’ requirements.
1x 10M Hose(outer diameter:7mm,inner diameter:4mm)
1x Faucet Connector Accessory
12x Tee Joint:
12x Adjustable drip head
12x Fixed Stem:
with a 20L water bag
5m set; 10m set; 15m set; 20m set; 25m set
PVC soft hose:
non-toxic ,no smell
4/7mm hose 1/4":
PP 1/4 tarb tee
8-hole water dropper:
Plant irrigation system Description
Our drip irrigation system is suitable for smallfarms, gardens . For example, watering young seedlings and cultivating new seeds.
Because his head is adjustable, the size and speed of the water flow can be controlled. According to the instructions of the switch on the top of the head, the left and right rotation can be done.
The water in the drip head flows out of the black rubber drip irrigation pipe. The inner diameter of the tube is about 4 mm and the outer diameter is about 7 mm. This size can just control the flow of rainwater. The length of the pipe is 10 meters, 20 meters, 30 meters, and so on. The length can be customized as required. Rubber tubes are non-toxic, environmentally friendly and durable.
The T-shaped support rod of drip irrigation is a black PE material used to support the tube, especially at the edge of the drip head. With this small support rod, the drip irrigation can be fixed to stabilize the water flow and the water pressure is normal.
This support rod installation is very simple. At the top there is a small, similar hook that directly hooks the water pipe, and the pointed end can be directly inserted into the ground or soil.
The distance between the support rods is arbitrarily regulated by the distance seen by plants that actually need drip irrigation. If you don't use it, just pull it out.
1.Black tube -10 meters
2.Drip head -10 pcs
3.Pot stake -10pcs
4.T connectors -10 pcs
5.[lug head -1pc
6.Round black connector -1pc
7.Green connector -1pc
8.Water bag 20L -1pc